詳細介紹：異形瓶瓶液體灌裝機采用負壓式。由于國產模制瓶容積差異大，相應裝量差異也大；同時負壓式灌裝時須將瓶口倒置浸入液體內，造成瓶頸瓶身粘液污染，達不到GMP要求，對此制藥廠家頭痛又無可奈何。
我廠成功解決了以上難題。我廠異形瓶灌裝機自動進瓶，經定位器二次智能定位，確保灌裝噴管準確插入瓶內，噴管在灌裝液體時慢慢上升，*消除泡沫。本機由于采用了扶助式定位裝置，對于不能直立的各種異形瓶尤為適用。本機灌裝精度達±0.5%，瓶口無粘液污染，*符合GMP要求。
異形瓶灌裝機適用瓶：圓形、方形、扁形、異形玻璃瓶和塑料瓶，特別適用于小口（1.5mm以上）、風油精瓶、紅花油瓶、香精瓶、細長瓶和各種不能直立的瓶型。
技術參數：
灌裝范圍：1-100ml
裝頭數：2-10頭
灌裝精度：±0.5%
灌裝速度：60-100瓶/分
電機功率：精密調速電機 0.5kw 220v 50Hz
整機尺寸：2600×1000×1650mm
機器凈重：200kg
Introduced in detail: special-shaped bottle liquid filling machine adopts the negative pressure type. As a result of domestic bottle volume difference is big, the corresponding difference of loading capacity is large; at the same time negative pressure filling bottle inverted within will be immersed in the liquid, causing bottlenecks bottle mucus pollution, is not up to the requirements of GMP, the pharmaceutical manufacturers headache and feel helpless.
I plant the successful solution to the above problem. I plant the profiled bottle filling machine automatic feeding bottle, the locator two inligent positioning, ensure accurate filling nozzle inserted into the bottle, nozzle in filling the liquid slowly rise, to compley eliminate the foam. This machine adopts the support type positioning device for not erect, various special-shaped bottle is particularly applicable. This machine filling precision is up to ± 0.5%, mouth of mucus without pollution, fully meet the requirements of GMP.
Bottle filling machine bottle: round, square, flat, special-shaped glass bottle and a plastic bottle, particularly applicable to small （above 1.5mm ）, oil, safflower oil, fragrance bottles bottles, bottles and a variety of not elongated upright bottle.
Technical parameters:
Filling range: 1-100ml
Head number: 2-10
Filling precision:± 0.5%
Filling speed: 60-100 bottle / min
Motor power: 0.5KW 220V 50Hz precision speed regulating motor
Machine size: 2600 x 1000 x 1650mm
Machine net weight: 200kg
采購中心
