KYF燭式過濾機

概述overiew
1、含固量較多且出干渣的精密液體過濾；

2、0.3μm以上顆粒一次濾住；
3、快捷的氣體反吹下渣同時再生濾管；
4、化學性能的剛性的PE、PA濾管能長壽命使用，大大降低運行費用。
5、密閉過濾，安全生產，無氣味外溢，改善生產環境且占地面積小；

6、特殊設計的密封圈實現了大口徑的氣動排渣底蓋的快速閉啟；
7、易組成自動控制操作；
8、清理、維護方便、快速；
9、根據工藝要求可在機體外設保溫夾套，機體內壁襯防腐材料層。

1.Preciseliquid fitration with a high solid content and dry residue;
2.Particles above 0.3μmarefiltered in one go;
3.Quick gas backflush to discharge residue and regenerate the filter tube simultaneously;
4.The nigid PE,PA filter tubewith superior chemical properties can be used for alonglife greatly reducing
operating costs.
5.Closed filtration,safe production,noodoroverfow,improv the production environmentａnd occupy
a smallarea;
6.pecialy designed seals enable quick opening and closing of the large-diameter pneumatic residue
discharge bottom cover;
7.Easy to form automatic control operation;
8.Easy and cleaning and maintenance;
9.According to proces requirements,an insulation jacket can be set outside the body,ａnd the inner wallof the machine can be lined with a of corrosion-esistant material.

梅花管濾芯結構原理Structureprinciple ofplum blosom pipeflterelement
1、中心管為清液收集管。

2、周邊多孔管為過濾介質的支撐。
3、濾芯外部套濾布作為過濾介質。
4、收集腔連接收集管和多孔管。
5、清液通過中心收集管離開過濾單元。

6、濾布外部形成濾餅層。
7、反吹氣體使濾布膨脹進而促使濾餅脫落。
1.The central tube is the clea liquid cllection tube.

2.The peripheral perforated tube isthe support for the filter medium.
3.filter element is covered with filter clothas the filter medium.
4.The collection cavity connects the colection tube and the perforated tube.

5.The clear liguid leaves filter unit through the central collection tube.
6.The filte cake layer is formed outside thefiter cloth.
7.The back-blow gas makes the filter cloth expend whichinturm promotes the sheding ofthe flter cake.

技術參數表Technical parameter table