發酵罐 Fermenter

JG型系列發酵罐                          

概述  

1、罐體系統:罐體材質，316L或304不銹鋼; 罐體設計壓力0.3MPa; 夾套設計壓力: 0.35MPa;罐體結構:帶發酵罐專用取樣、放料閥，帶有標準溫度、PH、DO 傳感器插口;罐蓋結構: 標準泡沫電極插口1個; 視燈視鏡口1個; 通用補料接口3個; 接種口1個; 排氣口1個;表面處理: 不銹鋼內外鏡面拋光，拋光精度Ra0.4;                                

2、滅菌方式: 在位蒸汽滅菌;    

3、攪拌系統: 三層六平葉發酵專用標準槳; 控制范圍:50~300rpm,控制精度: ±:1%;  

4、溫度控制: 冷卻水溫度+5~ 65℃; 精度: ±0.1℃;                                                

5、PH控制: 瑞士梅特勒PH電極及屏蔽導線; 范圍:2~12pH,控制精度: ±:0.02pH ;    

6、溶氧控制:瑞士梅特勒DO電極及屏蔽導線; 范圍:5~ 99%，控制精度: ±2%;    

7、泡沫控制自動檢測泡沫添加消泡劑; 靈敏度100~100000? ;                                

8、補料控制: 蠕動泵自動流加; 范圍: 0~ 5L/min,控制精度: ±2%;                          

9、空氣流量控制: 轉子流量計手動調節; 范圍: 0~5000L/min ;

JG series of fermenters

Overview

1, tank system: tank material, 316L or 304 stainless steel; tank design pressure 0.3MPa; jacket design pressure: 0.35MPa; tank structure: with fermenter sampling, discharge valve, with a standard temperature, PH , DO sensor socket; Can cover structure: Standard foam electrode socket 1; Sight glass mirror port 1; General feeding interface 3; Inoculation port 1; Exhaust port 1; Surface treatment: stainless steel inside and outside mirror polishing, Polishing accuracy Ra0.4;

2, Sterilization: in place steam sterilization;

3, Stirring system: Three layers of standard paddle for six-leaf ferment; Control range: 50 ~ 300rpm, Control accuracy: ±: 1%

4, temperature control: cooling water temperature +5 ~ 65 ℃; Accuracy: ± 0.1 ℃;

5, PH control: Switzerlａnd METTLER PH electrode and shield wire; Range: 2 ~ 12pH, control accuracy: ±: 0.02pH;

6, dissolved oxygen control: Switzerlａnd METTLER DO electrode and shield wire; Range: 5 ~ 99%, control accuracy: ± 2%;

7, foam control automatically detect the foam add defoamers; sensitivity 100 ~ 100000?

8, feed control: Peristaltic pump automatically flow plus; range: 0 ~ 5L / min, control accuracy: ± 2%;

9, air flow control: manual adjustment of the rotor flowmeter; range: 0 ~ 5000L / min;